阻燃,玻璃纤维增强材料25%,高强度, 抗溶解性, 汽车的发动机罩下的零件

Radici Compounds N66G25HSL V0

聚酰胺66

Radici Plastics USA, Inc.

Technical Data

 

产品说明

 

N66G25HSL V0 is a nylon 6.6 compound, reinforced with 25% glass fiber, heat stabilized and flame retarded to meet the V-0 requirement of Underwriters Laboratories Standard UL94 at 0.75mm.

 

Typical of semi-crystalline polymers, glass fiber reinforced nylons exhibit outstanding resistance even at elevated temperatures to the effects of a wide range of chemicals, solvents, oils and greases and are therefore suitable for use in many harsh environments including automotive under-hood. This compound is recommended for use in applications where high strength and rigidity characteristics are required, especially if performance at high temperature is critical, combined with flame retardance.

 

N66G25HSL V0 is internally lubricated for improved mold release. Particular attention should be paid to processing conditions and mold design to minimize both the risk of glass fiber breakage to fully realize mechanical performance, and also abrasive wear to machine and mold. Due to the excellent high temperature rigidity of this compound, fast cycle times can be expected.

 

The test specimens were tested at 73°F and 50% relative humidity and contain less than 0.2% moisture as a result of being stored in a moisture proof container immediately after molding.

 

总体

 

材料状态 • 已商用：当前有效

资料 1 •  Processing - MDE PA66 (English)

搜索 UL 黄卡 •  Radici Plastics USA, Inc.

供货地区 • 北美洲

填料/增强材料 • 玻璃纤维增强材料, 25% 填料按重量

添加剂 • 热稳定剂 • 润滑剂 • 阻燃

• 半结晶 • 耐化学性良好 • 热稳定性，良好

• 刚性，高 • 耐热性，高

• 生产阶段，快

性能特点 • 高强度 • 耐油性能

• 脱模性能良好

• 经润滑 • 耐油脂性能

• 阻燃性能

• 抗溶解性 • 热稳定性

用途 • 汽车的发动机罩下的零件

外观 • 可用颜色 • 自然色

形式 • 颗粒料

加工方法 • 注射成型

 

物理性能 额定值单位制 测试方法

比重 1.50g/cm³ ASTM D792

收缩率 - 流动 (3.18 mm) 0.20 到 0.40% ASTM D955

吸水率 (24 hr) 0.60% ASTM D570

机械性能 额定值单位制 测试方法

抗张强度 3 (屈服, 23°C, 3.18 mm) 159MPa ASTM D638

伸长率 3 (断裂, 23°C, 3.18 mm) 3.0% ASTM D638

弯曲模量 (23°C) 8270MPa ASTM D790

弯曲强度 (23°C) 228MPa ASTM D790

冲击性能 额定值单位制 测试方法

悬壁梁缺口冲击强度 (23°C, 3.18 mm) 91J/m ASTM D256

热性能 额定值单位制 测试方法

热变形温度 (1.8 MPa, 未退火) 245°C ASTM D648

熔融温度 250 到 265°C

可燃性 额定值单位制 测试方法

UL 阻燃等级 (0.750 mm, NC) V-0 UL 94

补充信息

Elongation at Break, ASTM D638, Type I, 0.125", 73°F: 2-4 %

 

 

 

 

 

聚酰胺66，PA66 Radici Compounds N66G25HSL V0是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123  微信：13549213581   QQ：15397858 

13549213581 肖生